Home & small business / Vernon, BC
Electrical Thermal Inspections in Vernon, BC.
Ad5Tech provides electrical thermal inspections for homes and small businesses in Vernon, BC. A thermal camera scan reads the surface temperatures of your electrical system — the panel, breakers, connections and equipment — to reveal overheating you can't see unaided, finished with a written report of what was found and what it means.
The approach
What an electrical thermal inspection covers.
Thermal imaging is non-contact and non-invasive: nothing is opened up and nothing is disconnected. The camera reads surface-temperature differences across your electrical equipment while it is in use, and heat where it shouldn't be — at a breaker, a connection or a device — often shows up long before that component fails.
Heat spots often point to a loose breaker-to-wire connection. Loose connections can frequently be corrected on the spot, so many scans end with a fix rather than a follow-up appointment.
At the end of the visit you receive a written report of what was found, with context on what each finding means and how urgent it is. Because our lead technicians are Red Seal electricians, thermal observations come with an electrician's read of the equipment, not just an image.
For a deeper look, the multi-point electrical safety review can be added — a panel-to-outlet checklist covering wiring types, grounding, GFCI and AFCI protection, surge protection and more.
To be clear about what this is: an electrical thermal inspection checks for heat patterns and common electrical issues. It is not a Technical Safety BC (TSBC) permit inspection, and it is not a replacement for a TSBC inspection or a full home inspection. If your project needs permit-related or regulated work, confirm those requirements before booking.
What we scan.
- Main electrical panel — temperature patterns across breakers, bus bars and terminations
- Breaker-to-wire connections — heat at connection points, the most common source of heat spots
- Switches and receptacles under load — devices running hot while in use
- Service entrance — meter base and entrance cable connection points
- High-draw equipment — appliances, HVAC, water heaters, hot tubs and EV charging equipment
- Junction and connection points — accessible splices and enclosures
- Exterior surfaces — temperature patterns that can reveal missing insulation or air leakage
- Moisture indications — surface differences that can point to water intrusion
- Add-on: multi-point electrical safety review — the full panel-to-outlet checklist, quoted separately
Requirements vary by property and equipment. Contact us with the details of your project for a site-specific conversation.
Built-in benefits
Why a thermal inspection.
Overheating found early
Heat at breakers and connections shows up on camera before it becomes a failure, a burn mark or an outage.
Nothing is opened
The scan is non-contact and non-invasive — no panels pulled apart, no walls opened, no disruption to your day.
Loose connections, fixed
Heat spots often trace to loose breaker-to-wire connections, and those can usually be corrected while we're there.
A report you can act on
Findings written up with what they mean and how urgent they are, so priorities are clear from the start.
Real setups
What a scan can find.
Thermal imaging reveals what the eye can't — here is what shows up most often.
- Loose breaker-to-wire connections — heat at the terminal, often fixable on the spot
- Overloaded or failing breakers — one breaker running hotter than its neighbours
- Missing insulation and air leakage — temperature patterns on exterior walls and ceilings
- Overheating devices — receptacles, switches and equipment running hot under load
Multi-point review
Add the full electrical safety review.
Thermal imaging reads temperatures; it doesn't check wiring types, grounding or device protection. For a deeper look, add the multi-point electrical safety review to the same visit.
Panel to outlets
The full checklist — service panel, wiring types, junction boxes, receptacles and safety devices — checked the way an electrician sees it.
Protection verified
GFCI and AFCI protection, tamper-resistant outlets, dedicated circuits and whole-home surge protection all reviewed.
One written report
Electrical findings and thermal observations combined into a single report, so everything sits together.
Fixes handled directly
Many findings — GFCI protection, label updates, loose connections — can be addressed during the visit; bigger jobs are facilitated through our partnered electrical contractors.
Common questions
Good to know
How long does a thermal inspection take?
It depends on the size of the property and how much equipment is scanned, but a thermal scan is typically completed in a single visit — usually faster than a full multi-point electrical inspection.
Is this the same as a Technical Safety BC inspection?
No. This is a general electrical thermal inspection. It is not a TSBC permit inspection and does not replace any inspection required by Technical Safety BC.
Is this a full real-estate home inspection?
No. This inspection covers the electrical system and building surfaces specifically and is not a replacement for a full home inspection. Confirm the scope you need before booking.
Can problems found during the scan be fixed?
Many can — heat spots often point to loose breaker-to-wire connections, which we can often correct right away. Other fixes such as GFCI protection and label updates are handled during visits too; bigger jobs like panel replacements or rewiring are facilitated through our partnered electrical contractors.
Do you check for whole-home surge protection?
Yes — as part of the optional multi-point electrical safety review, whether a surge protective device is installed at the main panel is part of the checklist.
Can a thermal camera see through walls?
No. It measures surface-temperature patterns; those patterns may suggest areas — such as overheating connections or missing insulation — to investigate further.
Do you offer thermal inspections for businesses?
Yes — offices, storefronts and small commercial spaces can be scanned the same way, and thermal scans pair naturally with power tracing and panel labeling in commercial settings.
Nearby services
Also worth exploring
Based in Vernon? Explore our Vernon service area or all nearby communities.
Next step / Vernon, BC
Let's discuss electrical thermal inspections
Tell us what you want to install, improve or understand. We'll help you find the right next step for your home or small business.
Ad5Tech
Vernon Home Systems & Technology Experts
Homes and small businesses · Vernon, BC